Polybutadiene Rubber

Description of Polybutadiene Rubber

Butadiene rubber-BR is a synthetic rubber. Polybutadiene rubber is a polymer formed from the polymerization of the monomer 1,3-butadiene. Polybutadiene has a high resistance to wear and is used especially in the manufacture of tires, which consumes about 70% of the production.

Another 25% is used as an additive to improve the toughness (impact resistance) of plastics such as polystyrene and acrylonitrile butadiene styrene (ABS).

Butadiene rubber, synthetic rubber widely employed in tire treads for trucks and automobiles. It consists of polybutadiene, an elastomer (elastic polymer) built up by chemically linking multiple molecules of butadiene to form giant molecules, or polymers. The polymer is noted for its high resistance to abrasion, low heat buildup, and resistance to cracking.

Uses of PBR

RAHA Oil Butadiene Rubber uses are BR in car tires, conveyor belts, footwear, cables, hosepipes and various technical rubber articles, tire sidewall, floor coverings, bicycle tires, footwear, children’s toys, cables, rubber pipes and various rubber articles having light color shades.

Sponge, industrial goods, rubberized fabric, and toys.

Black products requiring good process ability mechanical good compounds where color and staining are not decisive factors.

  • Tires: Polybutadiene is largely used in various parts of automobile tires; the manufacture of tires consumes about 70% of the world production of polybutadiene, with a majority of it being high cis. The polybutadiene is used primarily in the sidewall of truck tires, this helps to improve fatigue to failure life due to the continuous flexing during run. As a result, tires will not blow out in extreme service conditions.

 

  • Plastics: About 25% of the produced polybutadiene is used to improve the mechanical properties of plastics, in particular of high-impact polystyrene (HIPS) and to a lesser extent acrylonitrile butadiene styrene (ABS). The addition of between 4 and 12% polybutadiene to polystyrene transforms it from a fragile and delicate material to a ductile and resistant one.

  • Golf balls: Most golf balls are made of an elastic core of polybutadiene surrounded by a layer of a harder material. Polybutadiene is preferred to other elastomers due to its high resilience.

    Other uses:
  • Polybutadiene rubber may be used in the inner tube of hoses for sandblasting, along with natural rubber. The main idea is to increase resilience. This rubber can also be used in the cover of hoses, mainly pneumatic and water hoses.

  • This rubber can also be used in railway pads, bridge blocks, etc.

  • Polybutadiene rubber can be blended with nitrile rubber for easy processing. However large use may affect oil resistance of nitrile rubber.
PBR

Packing of Polybutadiene Rubber

Butadiene rubber packed in new or used 180 kg drums, iso tank, flex tanks, and bulk shipments. Each 20-foot container takes 80 drums.

Specification of Polybutadiene Rubber

ItemUnitSpecificationResultTest Method
Raw Mooney ViscosityMU41- 4945ASTM D1646-
07
Cis ContentWT%Min. 9696.4Internal Method
Volatile Matter ContentWT%Max. 0.750.5ASTM D5668-
09
Ash ContentWT%Max. 0.30.07ASTM D1416
Compound1 Mooney Viscosity MUMax. 7771ASTM D1646
Tensile Strength (35 min)Kg.f/cm³Min. 150162ASTM D412-06
Elongation at Break (35min)%Min. 440460ASTM D412-06
300% Modulus at 145°C
25 Minkg/cm²68 - 10876ASTM D412-06
35 Minkg/cm²74 -11492ASTM D412-06
50 Minkg/cm²74 - 11492ASTM D412-06

Leave a Reply

Your email address will not be published. Required fields are marked *