Bitumen VG 40 Description Bitumen VG 40 is a type of bitumen that is commonly used in road construction and maintenance. It is a highly viscous material that is derived from crude oil. Viscosity Grade 40 Bitumen has a higher viscosity than VG-30 bitumen, which makes it more suitable for use in areas with high […]
Viscosity Grade Bitumen 30 Description Bitumen VG 30 bitumen is a grade of viscosity bitumen used in cold climatic and high-altitude regions. This grade of bitumen is suitable for road construction in regions with 30 to 37 °C average temperature. The standard penetration value of bitumen viscosity grade VG 30 is 60 mm at 25 […]
What is Viscosity Grade Bitumen 10? Bitumen VG 10 means that your bitumen is also suitable for paving roads in a very cold and cold climate instead of the old 80/100 penetration grade. The air temperature that matches VG10 bitumen ranges from -100C to 250C. Due to the high temperatures in hot climatic zones, the […]
Sodium Sulphide Flake Sodium Sulfide & Its Characteristics Sodium Sulfide, or Na2S, is an inorganic chemical compound with the formula Na2S that has risen to prominence in the organic chemical industry. It’s a powerful alkaline solution that smells like rotten eggs when exposed to moist air. The solution of Sodium Sulphide obtained from the process […]
Description of Carboxymethyl Cellulose: Carboxymethyl cellulose, also call CMC, it’s white or slightly yellow flocculent fiber powder or White powder, odorless, tasteless, non-toxicant anionic water-soluble polymer based on renewable cellulosic raw material. Carboxymethyl cellulose-CMC in the pharmaceutical, cosmetic, oil, drilling, paper, textile, printing and dyeing industry, construction and other fields has been widely used in […]
Description of Polyanionic Cellulose: Polyanionic cellulose, abbreviated as PAC. It is a water-soluble polymer derived from cellulose. It would be more accurate to say polyanionic cellulose is a water-soluble cellulose ether chemically modified from natural cellulose. Its water resistance properties prevent fluid loss in mud. Having low viscosity and the high viscosity properties make this […]
Description of Soda ash dense Soda ash dense is the trade name for sodium carbonate (Na₂CO₃). It is synthetically produced in large quantities from salt (sodium chloride) and limestone by a method known as the Solvay process. The pure product appears as a while, odorless powder with a strong alkaline taste. It has high hygroscopicity. It […]
Description of Carbon Black: Carbon black is a very important additive to the rubbers that supports ELASTOMERS to improve mechanical properties. Black is used for light protection, coloring, and increasing the transmission properties. Decreasing the used rubber amount and its price to achieve mechanical efficiency and increasing operational efficiency as resistance rubbing causes the cost […]
Description of Potassium Chloride: Potassium Chloride (KCl, or potassium salt) is a metal halide salt composed of potassium and chlorine. It is odorless and has a white or colorless vitreous crystal appearance. The solid dissolves readily in water, and its solutions have a salt-like taste. Potassium chloride can be obtained from ancient, dried lake deposits. […]
Description of Aluminum Sulfate: Aluminum sulfate is a water-soluble, odorless, white crystalline compound with the chemical formula Al2(SO4)3 and CAS 10043-01-3. It has a sweet, mildly astringent taste and is insoluble in ethanol. It may burn, but it will not ignite. Other names of Aluminum sulfate are: Aluminum Sulphate, Cake Alum, Filter Alum, Papermaker’s Alum, […]
