Description of Mono Ethylene Glycol (MEG) Mono ethylene glycol (MEG) (also known as MEG, EG, 1,2-ethanediol, or 1,2-dihydroxyethane) is an organic compound with the formula C2H6O2. It is a slightly viscous liquid with a clear, colorless appearance and a sweet taste that emits virtually no odor. It’s miscible with water, alcohol, and many other organic […]
General Description of Malasian Rubber Standard Malasian Rubber (SMR), caucho or caoutchouc, as initially produced, consists of polymers of the organic compound isoprene, with minor impurities of other organic compounds, plus water. Thailand, Malaysia are two of the leading rubber producers. Types of polyisoprene that are used as natural rubbers are classified as elastomers. Currently, […]
Description of Acetic acid: Acetic acid (CH3COOH), also called ethanoic acid, the most important of the carboxylic acids. A dilute (approximately 5 percent by volume) solution of acetic acid produced by fermentation and oxidation of natural carbohydrates is called vinegar; a salt, ester, or acylal of acetic acid is called acetate. Industrially, acetic acid is […]
Description of Bentonite: Bentonite is an absorbent swelling clay consisting mostly of montmorillonite. It usually forms from weathering of volcanic ash in seawater, which converts the volcanic glass present in the ash to clay minerals. Bentonite beds are white or pale blue or green in fresh exposures, turning to a cream color and then yellow, […]
Bitumen Emulsion MS-2 General Description of Anionic Bitumen Emulsion MS-2 Bitumen Emulsion MS-2 is an anionic water-based emulsified asphalt with moderate viscosity and setting time containing minimum 60% bitumen designed makes it an ideal product for premixing applications. It is chocolate brown in colour and is a free-flowing liquid at ambient temperature Asphalt emulsions are […]
Bitumen Emulsion RS-2 General Description of Anionic Bitumen Emulsion RS-2 Bitumen Emulsion RS-2 is a rapid-setting anionic asphalt emulsion designed to break and cure quickly, destabilizing instantly on contact with aggregate surfaces.Bitumen Emulsion RS-2 is an anionic water-based emulsified asphalt with high viscosity and fast setting time containing minimum 57% bitumen designed for use as […]
Anionic Bitumen Emulsion RS-1 General Description of Anionic Bitumen Emulsion RS-1 Bitumen Emulsion RS-1 is a rapid-setting anionic asphalt emulsion designed to break and cure quickly, destabilizing instantly on contact with aggregate surfaces.Bitumen Emulsion RS-1 is an anionic water-based emulsified asphalt with low viscosity and fast setting time containing minimum 57% bitumen designed for use […]
Bitumen Emulsion SS-1h General Description of Anionic Bitumen Emulsion SS-1h Bitumen Emulsion SS-1h is an anionic slow-setting asphalt emulsion containing minimum 57% Bitumen designed for use as a tack coat, in fine-graded mixes, dust control, fog seal, and specialty applications. It is formulated with a harder base (lower penetration) than SS-1h for use in warmer […]
Bitumen Emulsion SS-1 General Description of Anionic Bitumen Emulsion SS-1 Bitumen Emulsion SS-1 is an anionic slow-setting asphalt emulsion containing minimum 57% Bitumen designed for use as a tack coat, in fine-graded mixes, dust control, fog seal, and specialty applications.SS-1 is a slow-setting anionic asphalt emulsion (i.e., low reactivity) low viscosity, and a hard asphalt […]
hgvhgvgv
